ender 5

Best Ender 5 Upgrades

Everyone who owns a 3D Printer probably wants better quality or speed. Over time your prints may not look as good or keep failing on you.

The Creality Ender 5 is already an excellent choice for a 3D printer, given its quality and price, but we want everything to improve in this day and age.

Fortunately, there are upgrades that you can apply to your Ender 5 3D printer to help you improve the functionality of the printer.

These, in addition to keeping your firmware up to date these upgrades will enhance your printing experience with the Ender 5.

Table of Contents

Why Do I Need Creality Ender 5 Upgrades

The Creality Ender 5 3D printer is already a superb printer that is inexpensive and has tons of features right out of the box. It’ll deliver high-quality prints and can print at higher speeds than its processors.

The magnetic bed makes removing your prints simple. These features don’t make it perfect by any means. There are always improvements that can be made.

Many people don’t like the stock parts that come with 3D printers and want to change them out from the start.

Other users are OK with upgrading as they go along or whenever they notice the print quality or other issues like bed adhesion, crooked bed, not extruding enough, or even too much.

These upgrades are something to keep in mind when buying an Ender 5 or any 3D printer. Here are some of the best upgrades you can get for your Ender 5 to make it even better.

Ender 5 Upgrades

Creality Upgrade Kit

If you feel like you need some minor upgrades out of the box or are just looking to improve the overall performance of your Ender 5, The Creality Upgrade Kit is a good choice for you.

The kit comes with:

  • 1M of Capricorn Premium XS Bowden Tubing
  • All-Metal MK-8 Extruder Feeder Drive
  • Four Bed-level springs
  • One pair of small and large pneumatic couplers

Pros

Cons

  • The All-Metal MK-8 Extruder Feeder Drive will help make filament loading easier with better grip
  • The Bowden tubing will provide less friction when the filament passes through it to help with clogging, slippage, and general wear and tear of the extruder
  • The bed level springs are also beneficial when it comes to keeping the bed level through multiple prints
  • There have been a couple of reports of poor quality in the materials used

BIQU Nema17 Stepper Motor Steel and Rubber Vibration Dampers

The official Creality 3D Upgraded Tempered Glass Bed Heated Bed will help with any adhesion problems you might have with the Ender 5.

The glass contains carbon and silicone, which will provide excellent adhesion for your prints.

The glass plate is easy to install, only needing a few clips to attach to the current hotbed.

This upgrade will solve any issues you may have had with using ABS filaments prints getting warped.

It will also work great up to 400o C, so you don’t have to worry about it overheating.

Pros

Cons

  • Much quieter printing
  • Includes all the screws to install
  • Well made parts
  • Great Price
  • An improper install can result in inaccurate prints

Creality Fireproof and Dustproof 3D Printer Enclosure

If you want to keep the temperature consistent and keep your printer and prints safe from dust, the Creality Fireproof and Dustproof 3D Printer Enclosure is a significant upgrade to consider.

The enclosure can also cut down on the noise while printing and protect you if the printer ever caught on fire.

One great reason to grab this enclosure, if you live in areas of the world where it gets very cold in the winter, this enclosure can help keep the heat in and prevent issues.

Pros

Cons

  • Provides consistent temperature
  • Waterproof and fireproof
  • See-through front
  • Easy setup
  • It can be a tight fit for the Ender 5 if you have a dual extrusion upgrade
  • Reports of the zipper not working properly

Creality 3D Upgraded Tempered Glass Heated Bed

The official Creality 3D Upgraded Tempered Glass Bed Heated Bed will help with any adhesion problems you might have with the Ender 5.

The glass contains carbon and silicone, which will provide excellent adhesion for your prints.

The glass plate is easy to install, only needing a few clips to attach to the current hotbed. This upgrade will solve any issues you may have had with using ABS filaments prints getting warped.

It’ll also work great up to 400o C, so you don’t have to worry about it overheating.

Pros

Cons

  • Great Price
  • Helps with ABS filament issues
  • Carbon and Silicone design
  • Official Creality Brand
  • Will work with temperatures up to 400 degrees C
  • Some users reported pieces of glass coming off with the prints
  • Reports of cracking of the glass during extended durations of use

LANMU Micro SD to Micros SD Card Extension

Even though our Ender 5 comes with an SD card reader, the LANMU Micro SD to Micros SD Card Extension can help make it easier to swap out your SD cards by giving you some wiggle room.

The cards are very small and can be tough to grab on to while trying to insert. The extender can help make this process easier for you.

The extender is also great for any other devices you have the need a bit of extension in the SD card department like

Pros

Cons

  • Easier to access the SD cards
  • The extender is compatible with multiple devices
  • Fast card reading
  • Great Price
  • Reports of some devices not working with the extender
  • Some users have reported poor quality of the extender

Leave a Comment

Your email address will not be published. Required fields are marked *