featured image hot end

Best 3D Printer Hot Ends

Hot Ends are a critical part of your 3D printer. Based on what you’re looking to create, you will need to find the right one to fit your needs.

Factors like output diameter and the material of the hot end are two significant factors to consider. Also, your budget is something to keep in mind when shopping for your new hot end. The great part is they’re not ridiculously expensive.

 

Best 3D Printer Hot Ends

Micro Swiss All Metal Hot End Kit

E3D Lite6 Hot End

Sovol Creality Extruder Hot end

E3D Titan Aero

What To Look For In Hot Ends

The hot end is one of the most essential components of a 3D printer. The hot end is the part that melts the filament and extrudes it onto the print bed. It controls the print temperature, the nozzle size, and the filament’s cooling to ensure your prints come out perfect every time.

Output Diameter

While 0.4mm is the most common size and will give you good all-around results, if you’re looking to print more miniature models, then you may want a 0.2mm size. Just keep in mind there are pros and cons using a smaller hot end. Time, clogging, and durability being the most common.

Print Material

Depending on what material you’re looking to print with, you’ll need a hot end to meet your temperature needs. If you’re only looking to print with PLA, then most models will be fine. If you want to print with a variety of materials, you should consider an all-metal hot end to handle high temps.

Hot End Material

If you need to print with materials like nylon, then you need to make sure your hot end can handle 240 to 260 degrees F needed. All-metal hot ends can take these higher temperatures. 

Cost

The price might seem obvious, but if you’re on a budget, your options will be more limited than if money was no object. There still are several hot ends on the market to meet your needs. Just be sure to remember you may not get all the features you need.

E3D V6

The E3D V6 hot end is a great all-around option. It’s compatible with a wide variety of printers and can handle high temperatures.

The V6 is labeled as “easy to use”. They made it easy to replace heater cartridges and the temperature sensors as described on their site.

The E3D is also completely customizable via the E3D website. They offer a large variety of upgrades for the hot end.

The E3D V6 can reach temperatures as high as 500 to 750 degrees F. With this temperature range, you can print with virtually any filament including flexible and soft filaments without worrying about jamming.

For those looking for precision, the V6 is a solid choice. It has a thermal break making sure the filament comes out how it needs to. Common problems like stringing are limited thanks to the all-metal heatbreak. 

Pros

Cons

  • Price
  • Easy to use
  • Precision
  • All-metal for construction is great higher temperatures
  • Installation on some printers can be tricky
  • Heat cartridge may not last long

Micro Swiss All Metal Hot end Kit

The Micro Swiss All Metal Hot End is another great all-metal hot end.

It’ll fit on a variety of printers including Creality Ender and Tronxy. It’ll also work on other models. You’ll just need to find the proper kit. It also comes with aluminum cooling, heating blocks, a brass-plated nozzle, and a titanium heat break.

It Supports nozzles size from 0.2mm to 1.2mm. This hot end is also easy to install and needs no firmware modifications for it to work. Right when you unbox it you should see a QR code which leads to the instructions on how to install the Micro Swiss. It comes in 4 major components in a small box which makes it even easier to set up.

You might have to re-level you bed because the hot end is smaller than usual. If you have auto-leveling then you need to adjust you z-offset. The last part to installation is resetting your firmware. Here’s a great video where you can get step-by-step installation instructions.

A huge downfall of this hot end in our opinion is it’s meant for the Creality CR-10 and a few other printers. There are a lot of printers on the market so this alienates a lot of 3D printing users.

Pros

Cons

  • High- tempertature capabilities
  • Plug and play
  • Precision
  • Clogs at lower temperatures
  • Price is high for not having electronics included

E3D Lite6 Hot End

If you’re new to 3D printing and still want a great hot end, look no further than the E3D Lite6.

It’s a great mid-range hot end that can grow with you. It’ll work on higher-end printers just as well as beginner printers. What makes it great for beginners is its extrusion control. A lot of beginners have problems setting up the printer which has the biggest impact on how the print comes out.

It’s great for lower temperature materials like PLA and ABS, but that doesn’t mean it’s limited to only these filaments.

You can also print with nylon, Ultem, and more. The max temperature you can use this at is 240 celsius. Sometimes temperatures like this can have wear and tear on your hot end. But, this hot end provides reliability as its stainless steel body makes it durable. This sort of durability is applicable to all of the hot ends here.

Pros

Cons

  • Excellent for beginners
  • Easy to assemble
  • Can use with multiple filaments
  • Low price
  • Basic for advanced users
  • Not customizable

Sovol Creality Extruder Hot end

The Sovol Creality hot end is the perfect budget option for anyone on a tight budget. The hot end kit is super easy to install and comes fully assembled.

This is one of the best inexpensive all-metal hot ends you’ll find out there today.

The Sovol Creality Htoend comes with the top quality Capricorn PTFE tubing with good lubricity and high-temperature resistance so that it’ll last you a while.

If you already have a Creality 3D printer, this is the replacement you should invest in. You get what you pay for. Don’t expect high-end temperature ranges from this model.

If you’re on a very tight budget and need a new hot end, give this one a shot.

Pros

Cons

  • Inexpensive
  • Comes fully assembled
  • Easy to install
  • High-temperature resistance
  • Low-temperature range
  • Not ideal for high-end printers

E3D Titan Aero

While the Titan Aero is technically an extruder/hot end combo, it’s an excellent choice due to its compact design. This allows for a shorter filament path which is ideal for jamming issues.

This is an E3D product, so you have access to all the customizations they offer to make it work. Mounts can be found to make this work with almost any printer.

Due to the Titan Aero’s smaller size, it dramatically increases print time. But still, this is an excellent high-end option for many 3D printer experts.

Pros

Cons

  • Highly compatible
  • Compact design
  • Eliminates the need for an external heatsink
  • Enables high-speed printing
  • Heatsink design
  • Extremely customizable
  • Mounting plate with standard hole patterns
  • It can be tricky to install
  • Expensive

Overall

There are several hot ends on the market to meet your needs. Depending on your budget, one of these hot ends will meet your needs.

If you’re looking for overall performance, quality, and reasonable price, you can’t go wrong with the E3D V6.

With the E3D, you’ll get the output you expect with the ability to use almost any printer.

Leave a Comment

Your email address will not be published. Required fields are marked *